Reduce your energy consumption and your carbon footprint, whilst improving the quality of your lighting.
Ulite Lighting can upgrade your existing light fittings by either refurbishing or replacing your existing luminaires – saving you money, reducing energy consumption and dramatically reducing your carbon footprint.
Induction Rated Lumen Maintenance is largely determined by operating temperature of the lamp and quality of lamp design; U-LITE induction systems are designed and manufactured with high quality tri-phosphors and solid amalgam to optimize the performance and rated life of the lamp. The above chart is intended to represent an average rated lumen output stated as a percentage of the initial lumen output over the rated life of the lamp. Operating the lamp within the temperatures specification will typically result in an average estimated 70% lumen output at 60,000 hours.
indution_diagram

Energy Saving Technologies

COMPARE THE LIGHT SOURCES
Induction Lamp VS LED, Metal Halide, High Pressure Sodium
# Induction Lamps LED Metal Halide High Pressure Sodium
Lifespan(Hrs) 60,000~100,000 30,000~50,000 10,000~15,000 15,000~24,000
Efficiency lm/W 65 ~ 90 40 ~ 65 60 ~ 110 60 ~120
CRI >80 >70 >70 >20
S/P Ratio 1.46 ~ 2.25 1.96 1.49 0.62
Color Temp. Full Range Full Range Limited Range Limited Range
Hot Restart Instant Instant Delay Delay
Mercury Low N/A Low ~ High Low ~ Medium

INDUCTION LIGHTING TECHNOLOGY

  • FEATURES

    • No electrode or filament to burn out. Electrolytic capacitors are high temperature (105°C) and high voltage (450V) resistant. High quality mica-film capacitors, resistors and crystal diodes are used.
    • Pupil luminous flux: up to 150 Plm/Watt. Ballast power factor: up to 0.99. IC-controlled electronic ballast.
    • IC-controlled electronic ballast.
    • Color Rendering Index (CRI) of 80+ Color Temperature. Range (CCT) of 2700K to 6500K. Working frequency of 210kHz.
    • Harmonic content meets the International L Class standard.
  • ADVANTAGES

    • Long performance life, up to 100,000 hours. High luminous maintenance rate (95% after 2,000 hours and 85% after 6,000 hours)
    • High system efficiency 50% greater than magnetic ballasts, 20% greater than conventional electronic ballasts.
    • Wide voltage range. Instant start. Reliable ignition down to -40°C.
    • Enable color to be perceived correctly. Excellent lighting quality. Range of CCTs for various applications. No flicker.
    • Less chance of interference with the electrical grid.
    • Less chance of harm to electronic devices.
  • BENEFITS

    • Reduces re-lamping cost.
    • Reduces electricity costs by up to 90% compared to incandescent lamps, 75% compared to HID lamps, and 50% compared fluorescent lamps.
    • Wide range of applications than conventional light sources.
    • Health and environment safety.
    • Electrical grid safety.
    • Devices perform properly.

REPLACEMENT CONVENTIONAL LAMPS TO INDUCTION LAMP

Lamp Type CONVENTIONAL LAMSP INDUCTION LAMP
# Power Rating (W) Operation Rating (W) Power Rating (W) Operating Rating (W)
HPS 70 84 40 43
100 120 40 43
150 180 80 86
250 300 150 162
400 464 200 216
MHL 70 84 40 43
100 120 40 43
150 180 80 86
250 300 150 162
400 460 200 216
HPM 80 100 40 43
125 150 40 43
160 192 80 86
250 300 120 130
400 460 150 162
450 450 200 216
CFL 38 38 23 23
85 85 40 43
125 125 80 86
165 165 80 86

RESOURCES MANAGEMENT

Energy Savings
  • Reduce Wattage
  • High Efficiency Ballast Technology
  • Control Management Systems
Maintenance Savings
  • Reduce Labor Cost for Re-Lamping
  • Reduce Contract Service Cost
  • Reduce Inventory Maintenance Cost
Replacement Savings
  • Reduce Overall Replacement Cost